Famisound is a sound simulator of the retro game hardware. It can play the sound by operating a virtual register using the standard controls of iOS.
 

 

Toolbar buttons

• [Play button] – Play the sound
• [Pause button] – Stop the sound
• [Reset button] – Reset the settings to the default

 
Settings

• [Pulse wave channel 0 and 1]
• [Enable] – (ON/OFF)
• [Loop] – (ON/OFF)
• [Duty] – (12.5%/25%/50%/75%)
• [Decay] – (ON/OFF)
• [Power] – Decay speed (if [Decay] is on) or volume of the sound (if [Decay] is off)
• [Sweep] – (ON/OFF)
• [Direction] – (Down/Up)
• [Delay] – Delay of the sweep speed
• [Detail] – Detail of the sweep
• [Length] – Length of the sound
• [Hz] – Frequency of the wave

 
Triangle wave channel

• [Enable] – (ON/OFF)
• [Loop] – (ON/OFF)
• [Counter] – Counter of the stop the sound
• [Length] – Length of the sound
• [Hz] – Frequency of the wave

 
Noise channel

• [Enable] – (ON/OFF)
• [Loop] – (ON/OFF)
• [Decay] – (ON/OFF)
• [Power] – Decay speed (if [Decay] is on) or volume of the sound (if [Decay] is off)
• [Type] – (Long/Short)
• [Length] – Length of the sound
• [Hz] – Frequency of the wave

 
Note

• DPCM channel is not supported.
• It is neither musical instrument nor the composition tool.
• It doesn’t have the recording function.
• When the sound was played, the delay is slightly generated. But this is due to the specification of hardware.

 

You Might Also Like...