The famous waveform-sculpting synthesizer finally available for iPad! The latest generation of our Sound Scope synthesizer, with a completely rewritten audio engine, Kuzmoscillator™ modulator, echo, arpeggiator, more range, and higher resolution!
 

 

WAVEFORM EDITOR:

Use your finger to sculpt the oscillator waveforms! Try to draw a jagged shape for rich harmonics. Draw a smooth wave for smooth tones. Use a square shape to create hollow, flute-like sounds. Use the preset wave shape buttons as starting points for different timbres. The oscillators will morph to the preset shapes in time with the arpeggiator tempo. The flat lines silence each oscillator. The stair step lines turn on aliasing, for a harsher, more retro 8-bit sound.

PERFORMANCE AREA:

Simply touch the play area in the bottom third of the screen to play notes like you would on a keyboard. You can use a pinching motion on the ruler on either side of the screen to zoom into a particular pitch region for more precise control. Use two fingers to drag either ruler left or right to change the pitch region you are playing.

With the arpeggiator set to on, try using more than one finger on the central column; Space will step through all of the pitches you have pressed!

MODULATION AREAS:

Here you can change the arpeggiator and echo mode, and change their timing. With the arpeggiator on, you can use several fingers at once on the performance area, and Space will repeatedly step through these notes. With the arpeggiator turned off, you can play Space one note at a time like you would a keyboard.

The Kuzmoscillator™ modulator is an LFO control for pitch and volume. Drag across it horizontally, and you will cause the sound to go up and down in pitch. Drag vertically, and you will do the same to volume. The distance of your drag determines the AMOUNT of variation, while the speed of your drag determines the SPEED of variation.
 

You Might Also Like...